Fluorocarbon paint is a two-component paint that uses fluorocarbon resin and special resin as the main film-forming substance. It has excellent protective properties, including strong weather resistance, good resistance to damp and heat, and can withstand high temperatures and Resistant to low temperature, it has excellent protection against acid, alkali, salt and various chemicals. The unique performance is low abrasion and non-stickiness.

Fluorocarbon paint spraying skills

1. Base surface treatment: Before construction, the base surface needs to be treated to the standard, and the impurities and dust on the base surface should be removed. For the fluorocarbon primer that has been cured for a long time, the base surface should be sanded. Hair, then dispose of the residue, wait for the base surface to be clean and dry, without moisture condensation, without acid and alkali, and then paint for use;

2. Top coat preparation: mix the two components of the fluorocarbon paint according to the indicated proportions, first add the ingredients to it and stir well, then add the curing agent ingredients in strict accordance with the indicated proportions into it and mix well and adjust the viscosity Appropriate, the viscosity affects the construction quality of spraying. If the viscosity is too high, it needs to be diluted with an appropriate amount of special diluent to reach the appropriate viscosity; the prepared paint should be filtered with a filter to remove the impurities that enter the mixing, and the construction should also be Stir the topcoat to avoid uneven coating caused by precipitation;

3. Spray painting: During the construction, the spraying construction method needs to pay attention to the adjustment of its air pressure. The high or low viscosity during the construction will affect the construction quality. Choosing the appropriate spray gun diameter is the key to high-quality film formation. The distance between the base surface is 20-30μm, always keep it perpendicular to the construction surface, and the construction needs to be carried out at a uniform speed;

4. Environmental restrictions: Environmental factors during construction are a very important factor. Keep the construction temperature between 5-35°C and relative humidity below 75%, and maintain good ventilation;

The above is the spraying skills of fluorocarbon paint introduced by the editor, I hope it will be helpful to everyone!